Lionized
Well-Known Member
- Local time
- 11:30 PM
- Joined
- Mar 23, 2014
- Messages
- 1,998
- Reaction score
- 1,737
- Location
- Vancouver Canada
Looking for just the intermediate rod for a 440/727 combination, 1968 - 71.
I recently installed an Edelbrock Performer RPM and pretty much immediately realized that the intermediate rod for the 383 would be too short. By just about an inch.
The intermediate rod is the rod which runs from the bell crank on the intake down the back of the engine to the transmission bell crank. I realize I could modify the rod I have but I would rather not.
Thank you FBBO!
I recently installed an Edelbrock Performer RPM and pretty much immediately realized that the intermediate rod for the 383 would be too short. By just about an inch.
The intermediate rod is the rod which runs from the bell crank on the intake down the back of the engine to the transmission bell crank. I realize I could modify the rod I have but I would rather not.
Thank you FBBO!