.......so, I'm seeing a ton of product out there for LED light upgrades. Has anyone gone this route, and can you recommend a savvy way to go about getting all the lights, colors and sizes for a 1969 Bee....or in general?
LED light conversion suggestions
- Thread starter Durandal25
- Start date
I haven't done it yet but a few here have gone this route.
https://www.superbrightleds.com
Keep in mind too that flashers will need to be different and some grounding issues too for the lights. For them to work properly.
I'm sure someone who has done it will chime in to help. Good luck
https://www.superbrightleds.com
Keep in mind too that flashers will need to be different and some grounding issues too for the lights. For them to work properly.
I'm sure someone who has done it will chime in to help. Good luck
HYRDGOON
Well-Known Member
- Local time
- 11:13 PM
- Joined
- Apr 20, 2013
- Messages
- 3,375
- Reaction score
- 2,748
- Location
- Breslau, Ontario, Canada
For signals you need a no load flasher. I bought the "keep it clean" brand from amazon
For lights itself a lot of people use the superbrightled website as a reference to get all the correct number a then buy from eBay or Amazon because superbrightled is on the pricy side.
For lights itself a lot of people use the superbrightled website as a reference to get all the correct number a then buy from eBay or Amazon because superbrightled is on the pricy side.
Roger that sir. There is also a new brand on the market called "Plasma" that is making the rounds on Youtube that I've been looking at.
Similar threads
