Linkage setup for tunnel ram on a 360 B-Body

[lancedkasey]

I have a weiand tunnel ram with two 450 holleys on a 360 going into 68 Charger does anyone have any info on setting up the throttle cable, I was wondering what brackets to use I have a new locker kick down cable but stock throttle cable any help would be much appreciated.

 

[Meep-Meep]

Seems to me I used a slant 6 cable when I had a tunnel ram on my 68 RR (383). That cable is longer and should get you closer to the carbs but you will still have to fab something. Of course I'm speaking from about 25 yrs ago and before the advent of bolt on custom cables. The kick down may be a little trickier and a fairly easy way around that is to get a B&M manual kit for your valve body.

 

[lancedkasey]

I bought the b&m transpak is that the same thing or is it something different.