• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB Looking for a 1968 roadrunner standard dash wiring harness no a/c.

Status
Not open for further replies.
I can, I thought you didn't want one with tach with tach wiring? i will have to check condition .
 
Ok, the tail end that goes to the heater area has 3 plugs cut off!!! 11 wires that I believe go to 3 plugs. Sorry, could be used as donor or yours as donor? I compared with the rally harness's I have which are slightly different, and that's what it looks like.

100_7088.JPG


100_7090.JPG


100_7091.JPG
 
The charger has a ralley dash cluster instrument gauges. Much of the harness could be alike. If you have an existing harness you might be able to use most of it.

But I’m not sure if you are willing to go through the effort. If you have a wire schematic it could give you some insight.

I don’t have a 69 RR harness to compare.
 
Status
Not open for further replies.
Back
Top