Looking for a Mopar Performance ECU Chrome box P4120534. Prefer new....but will consider very nice used. PM me with details. Thanks in advance! Joe
Joe, I can't help with a MP chrome box but I run the FBO box and I like it a lot better than the chrome box I had. It's made in USA and has a rev limiter. If you want to have a look, you can find it here:
http://4secondsflat.com/Ignition.html
You have to find an older Chrome or Orange box for it to be a good unit. The last decade or so of MP ignition boxes were crap. The Revenator or FBO boxes are take off’s that are upgraded.
MP did not discontinue there ignition boxes due to the RBO or Revenator boxes. That idea is just ridiculous.
I have a perfect running setup on my 68 Dart 10.40@126mph right now that I would sell. Your inbox is full.Looking for a Mopar Performance ECU Chrome box P4120534. Prefer new....but will consider very nice used. PM me with details. Thanks in advance! Joe
Pretty odd that they claim that NO OTHER coils will work with their box AND that nobody else has the ability to test these parts but them. WTF ??? Talk about trying to corner the market !Joe, I can't help with a MP chrome box but I run the FBO box and I like it a lot better than the chrome box I had. It's made in USA and has a rev limiter. If you want to have a look, you can find it here:
http://4secondsflat.com/Ignition.html
DO NOT use any MSD Blaster, Accell or parts store Coil, they are incorrect for the Micro-Processor Type FBO Ignition Box and will not perform correctly and could damage the ECU. The Processor has been programmed to maximize output to the 40011 coil. No other coil that we have tested will perform as well as the Pertronix 40011. The processor program is burned to match that coil.Pretty odd that they claim that NO OTHER coils will work with their box AND that nobody else has the ability to test these parts but them. WTF ??? Talk about trying to corner the market !
All I can tell you is that it has given me problem free reliability and performs well. Don at FBO is easy to get ahold of and always willing to help with any issues and you don't have to go through the press one for english and sit on hold for a half hour. Just leave a message and he calls you back.Pretty odd that they claim that NO OTHER coils will work with their box AND that nobody else has the ability to test these parts but them. WTF ??? Talk about trying to corner the market !
Further down, they state that NO parts store testing equipment is to be used as it will damage the unit.