More picks drum id

[Nick ciavarino]

More pics 64 sfury

 

[BLK 68 R/T]

They look like the HD rear drums that my 70 super bee had. 11 x 2.5 rear and 11 x 3 front I believe.

 

[Nick ciavarino]

They look like the HD rear drums that my 70 super bee had. 11 x 2.5 rear and 11 x 3 front I believe.

Thanks for your info.

 

[AR67GTX]

Have you measured the diameter? Might be 11” but I didn’t think 11” had self adjusters. Possibly there were a few exceptions or they were adapted to them.

 

[BLK 68 R/T]

Have you measured the diameter? Might be 11” but I didn’t think 11” had self adjusters. Possibly there were a few exceptions or they were adapted to them.

My super bee had self adjusters.

 

[oldbee]

My super bee had self adjusters.

Mine didn't and still doesn't.

 

[Photon440]

I guess adjusters were optional, the FSM shows both configurations.

 

[Nick ciavarino]

Thanks for all the input guys I just need a set of rear brakes that will work on my 64 i'm going to change out the wheel cylinders to 15/16 bore these shoes do not engage drums do measure 11 inch.Any help is very welcome Thanks Again.

 

[BLK 68 R/T]

Do they not work at all? Do they move with the drum off is someone pushes the brake pedal?

 

[Nick ciavarino]

No

 

[BLK 68 R/T]

Rear brake lines have fluid come out if you loosen them from the wheel cylinders?

 

[BLK 68 R/T]

Thanks for all the input guys I just need a set of rear brakes that will work on my 64 i'm going to change out the wheel cylinders to 15/16 bore these shoes do not engage drums do measure 11 inch.Any help is very welcome Thanks Again.

No sense in changing anything until you confirm a few things.

 

[Nick ciavarino]

Rear brake lines have fluid come out if you loosen them from the wheel cylinders?

Yes no air in lines.

 

[Nick ciavarino]

Have you measured the diameter? Might be 11” but I didn’t think 11” had self adjusters. Possibly there were a few exceptions or they were adapted to them.

Yes

 

[Nick ciavarino]

No sense in changing anything until you confirm a few things.

Ok ?

 

[BLK 68 R/T]

Ok ?

So you have fluid to the rear cylinders, and fluid comes out of the bleeders when loosened and someone pushes the brake pedal. That tells me that the wheel cylinders are probably rusted internally.

 

[Nick ciavarino]

Did not drive car very much spent lots of time at ball fields with my G/Kids over the years.I hope that's the problem will change out hope it works THANKS AGAIN YOU ARE A VERY NICE PERSON.

 

[BLK 68 R/T]

Did not drive car very much spent lots of time at ball fields with my G/Kids over the years.I hope that's the problem will change out hope it works THANKS AGAIN YOU ARE A VERY NICE PERSON.

Hope the wheel cylinders are the problem. Good luck and report back if that fixes the issue.

 

[Nick ciavarino]

Hope the wheel cylinders are the problem. Good luck and report back if that fixes the issue.

Replaced w/c's with the ones you suggested brakes seem to work fine have just have some adjustments on the shoes THANKS again

 

[moparedtn]

Have you measured the diameter? Might be 11” but I didn’t think 11” had self adjusters. Possibly there were a few exceptions or they were adapted to them.

Starting in 1970 they did. Prior, at least according to the FSM, they didn't.
I'm just now upgrading all my 11" stuff to the later self-adjusters.