Bill Monk
Well-Known Member
I bench tested the motor and it works fine. I replaced the switch, hit the button and the wipers worked. Problem solved right? Not so fast, the next time I turned them on, the wipers moved but at a snails pace, like barely moving at all. When I turn the switch off, they park normally and at a normal speed. I cleaned all the connections at the firewall and still no change. It's clearly a short but I can't find it so my question is how do I get around this? I can run a hot wire straight to the brown wire on the motor but that will give me only high speed. Does anyone make just a wire harness for the 3 speed wipers or am I looking at buying a whole under dash harness to get what I need?