Mike Gaines
Well-Known Member
- Local time
- 2:02 PM
- Joined
- Apr 17, 2014
- Messages
- 2,098
- Reaction score
- 4,297
- Location
- Ahwahnee, (Fresno) California
I have now had my fiberglass pin-on deck lid on my car for a few weeks.
The overall quality is great and the fitment is perfect.
The finish when received was paint ready with very little, of any, prep required.
I has withstood my 131+ MPH runs with no problem.
I attached it with 4 "hood-pins" in the 4 corners.
My OEM deck lid weighed a whooping 69 pounds compared to about 9 pounds for the fiberglass unit.
Good fiberglass suppliers are hard to find. I purchased my Pin-On fiberglass hood and 5" RO hemi style scoop from GlassTech and the quality was great.
This fiberglass Deck Lid was from Larry at Sled City and the quality was great also.
The lead time for the shipment from Sled City was much shorter than GlassTech
The overall quality is great and the fitment is perfect.
The finish when received was paint ready with very little, of any, prep required.
I has withstood my 131+ MPH runs with no problem.
I attached it with 4 "hood-pins" in the 4 corners.
My OEM deck lid weighed a whooping 69 pounds compared to about 9 pounds for the fiberglass unit.
Good fiberglass suppliers are hard to find. I purchased my Pin-On fiberglass hood and 5" RO hemi style scoop from GlassTech and the quality was great.
This fiberglass Deck Lid was from Larry at Sled City and the quality was great also.
The lead time for the shipment from Sled City was much shorter than GlassTech