Need help identifying a wheel

[Richard Cranium]

This is a friend's wheel. I know it's a 15" X 6 1/2" JJ & the mfg date is 7-11, but what year & what would it be used on?

Although not shown, it also has a "H" stamped in the center hub.

Thanks!

 

[Mike67]

Yup....you are correct that is a wheel all right....A round one too!!!

 

[moparnation74]

71......six pack/hemi......

 

[33 IMP]

The a12 guys have a good thread on id-ing h wheels, both dating and repop identifying,

 

[69 MBee]

This is a friend's wheel. I know it's a 15" X 6 1/2" JJ & the mfg date is 7-11, but what year & what would it be used on?

Although not shown, it also has a "H" stamped in the center hub.

Thanks!


Looking at the pic, the Plant is M3, 5 (75) is the year, the Month is 7 (July) and 11 is the day of manufacture. These "H" wheels are typically used on station wagons and also known as Ramcharger wheels.
The highly sought after H wheels manufacturing origin is Canada and are 6" wide. There are corresponding clock positions for the alignment of one of the three "nubs" to valve stem as well as the H position... as well the build dates…..dead giveaways.

 

[chignikred]

key ID is the M35 so a 1973. I'll bet the valve stem number reads 3621956. Not an A12 wheel