Jmoparman
Member
64 polara, 500 inch flat top motor 727 4.30 Dana. 3730 lbs afco da shocks all around best 60 ft 1.50 10.55 @ 129. First time with da shocks not sure what to do.
Last edited:
how is the suspension set up. ties are they radials or bias what type of shocks. do you have a trans brake or something else. stok or super stock springs do you have sliders or snubber on the diff. the real racers can help you with the math. hp, gear etc and the rest of whats needed. i really like the car sounds great. i know one thing for sure practice and prays. talk with the racers on here and they can help.
64 polara, 500 inch flat top motor 727 4.30 Dana. 3730 lbs afco da shocks all around best 60 ft 1.50 10.55 @ 129. First time with da shocks not sure what to do.
Shock rebound is way too loose. Watch the video. It doesn't spin at the hit. It spins when both ends of the suspension top out. What shocks ? Where are the settings now? Count back from full tight and let us know. Meanwhile watchhere.
Doug
If I remember correctly Afco are 20 position in compression, 40 position in rebound. Lets start at the front. I would start closer to -10R and leave it at -5C. Try that first. Then lets see more video. It may even need tighter front rebound. My front Afcos used to got run at 0 to -2R. Then we had them revalved 50% tighter. Depending on track prep you can probably start tightening the rear rebound as well. Try the front first.
Doug