Hijinx
Well-Known Member
Looking for a nice set of LCA's for a 74 charger, the ones i have are a bit loose around the pivot shaft ... seems to wiggle a bit too much. Need them Straight with minimal rust. Let me know what you have, pics and price.
WTB Needed 74 Charger Lower Control Arm
- Thread starter Hijinx
- Start date
- Status
Bb70charger500
Well-Known Member
There rebuild able there's a bushings in there !
- Local time
- 8:18 PM
- Joined
- Jul 31, 2011
- Messages
- 9,206
- Reaction score
- 4,383
- Location
- Western Colorado High Desert
Does yours have screw in ball joints or press in joints?
Yes you can replace the bushings.
Yes you can replace the bushings.
Hijinx
Well-Known Member
press in ball joints... where would one find a rebuild kit for it? or a diagram...
- Local time
- 8:18 PM
- Joined
- Jul 31, 2011
- Messages
- 9,206
- Reaction score
- 4,383
- Location
- Western Colorado High Desert
PST
NAPA
Autozone
Etc.
NAPA
Autozone
Etc.
- Local time
- 8:18 PM
- Joined
- Jul 31, 2011
- Messages
- 9,206
- Reaction score
- 4,383
- Location
- Western Colorado High Desert
I have a new set of urethane bushings if interested.
Bb70charger500
Well-Known Member
Sent you a few links
I'll post the one here this is the step by step .
http://www.crazysmopar.com/tech_frontend_lca.html
I'll post the one here this is the step by step .
http://www.crazysmopar.com/tech_frontend_lca.html
- Status
Similar threads
- Locked
- Locked
