• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

New stance!

Bigfoots N Mopars

Well-Known Member
Local time
7:27 AM
Joined
Aug 1, 2016
Messages
303
Reaction score
581
Location
Savage
Springs moved inboard, Caltracs. +1 split monos, rear sliders. MT 295/65 r15 on 15x10 5.5” back space.

This will be mini tubbed too, but this will be ‘Street combo’ Getting a mild roots blow 440

ED401927-ADCB-4429-87D8-CFA25C657B5B.jpeg


9F4A6CB6-565A-42B7-AC55-C9F443506AB8.jpeg


4B507A89-3BB6-4110-93C0-ED5FEAFBCBA2.jpeg
 
It's not the wheel tub thats the real limit on size. It's the spring. We have a 62 that runs the springs moved flush to the outer rail. Sliders and cal tracs. 10" wheels with 10.5x29.5 M/T Pro Drag radials. Stock wheel wells and tubs except for the outer lip is rolled up. My 64 is tubbed. The frame flange is what limit it. The flange is trimmed flush. Outer lip is thinned to 1/2". 10.5W x 31 M/T's on a 12" rim fit with about 1.2" clearance on each side. Section width is 15.5". This car has ladder bars so no spring interference.
Doug
 
Looks good. Mine is also mini tubbed with Caltracs and split mono leafs moved inboard but with a -1" ride height. I run either 29.5x10.5W's or 315/60/15 Drag Radials also on 15"x12" wheels..
 
Bigfoot I would like to asked a couple questions if you don't mind. First one what shocks will you be using. Second on your sliders how much forward travel do you leave before it bottoms out. Thanks for any input bearman
 
Here's where we ended up. This is with Calvert monos and Cal tracs. Been high 1.3x 60ft with a 3.54
Doug

20230407_143551.jpg


20230407_143502.jpg
 
Auto Transport Service
Back
Top