XCELLR8
Well-Known Member
I replaced my 8.25 rear-end with a 9.25 sure grip. When looking at the carrier the outside was machined and looked like it was 2 pieces. Was the OEM unit as cast or machined? I'm thinking the carrier might be an aftermarket unit. When I was able to try it out the sure grip gave out to a one wheel peel, so I'm looking to replace or rebuild. There were no markings or numbers I could see without disassembly. If I replace, what is a good brand to use for a street/cruiser car. The rear is a 1977 9.25 sure grip.