Aron Gleason
Well-Known Member
Has anyone dealt with Pentastar parts? They're selling a mp .620 lift cam for a 440 for $200. Just wanted to make sure they're a legitimate company.
Pentastarparts
- Thread starter Aron Gleason
- Start date
khryslerkid
Well-Known Member
- Local time
- 3:08 AM
- Joined
- Mar 10, 2010
- Messages
- 32,027
- Reaction score
- 58,335
- Location
- Hanover, Pennslyvania
Do you have a link?
Pentastar is a product and also an Australian parts and restoration place.
Aron Gleason
Well-Known Member
I don't have a link, but they're in Webster, Ky.
Last edited:
Aron Gleason
Well-Known Member
They say that .620 lift cam would work with my 2266 pistons without any interference.
- Local time
- 3:08 AM
- Joined
- Aug 18, 2024
- Messages
- 2,371
- Reaction score
- 5,108
- Location
- Virginia Chesapeake Bay
No website but has a Facebook page only. Run away.
Aron Gleason
Well-Known Member
Yeah they advertise on Facebook alot. But just wanted to ask here to be cautious.
My exact sentiments too.
Who is they? The people that know what head gasket you have? what rockers? How much the heads were cut? How much the block has been decked? If THEY don’t know all that info then I would not trust them…
Also I like others would not trust them just because of only having a Facebook page…
Dodge33
Well-Known Member
If they will not speak to you on the phone, and will not send you any pics of the cam to your email, it's more than likely not legit in
my opinion.
my opinion.
Aron Gleason
Well-Known Member
They have pictures of the cam and lifters on their Facebook page. But like most that advertise on there it makes me leary. Thanks guys. Im going to pass.
- Local time
- 3:08 AM
- Joined
- Aug 18, 2024
- Messages
- 2,371
- Reaction score
- 5,108
- Location
- Virginia Chesapeake Bay
Smart move. I just noticed this too. They have only been on Facebook for 6 months.
Aron Gleason
Well-Known Member
Yep. Thats why I asked in here, some good people in this group that are always willing to help out.
Similar threads
