Power Steering Gear Box

[1967 satellite]

I have never changed a gear box before so please bear with me. This is a picture of mine in the car. It leaks pretty bad at the seals, and the steering is loose, so I want to replace it with an exact duplicate. Can anyone steer me in the right direction as part number, manufacturer, and company where I can purchase one. A remanufactured one is totally acceptable. Also I want to change the coupling. Is there anything else that I would need to change it out? Many thanks in advance. 1967 Plymouth Satellite

 

[ckessel]

Last portion should help you.

I recently put a new Lares 11033 box plus their 12112 pump and 176 pressure line adaptor on my 67 wagon. Works great. If you have oe exhaust, it's a direct bolt in. If you have headers like me, Hedman's on a 440, you have to thump some tubes for it to fit. #3 and #5 needed a little persuasion. Otherwise straightforward. If you have a similar engine/exhaust combo, I can give you some install tips. Also you can go with the Borgeson box, get it from BAC[ one of our sponsors]. Many people use them too and are happy with them. If you decide to go rebuilt oe, stay clear of using parts store rebuilds unless you're a glutton for punishment. Steer and Gear, Firm Feel, Redhead and Lares all do excellent rebuilds on oe boxes.

 

[Don Frelier]

I've used "steer and gear" for both cars.
They've been great
I did hear some poor reports recently.

 

[Bird 426]

Yeah, is there a reason that you do not want to have it rebuilt? Steer&Gear in Ohio or there's a place up in Minnesota.

 

[1967 satellite]

Yeah, is there a reason that you do not want to have it rebuilt? Steer&Gear in Ohio or there's a place up in Minnesota.

Not at all. Didn't know where there was a place. Thanks, I will look into it.

 

[Billccm]

Steer N Gear has some quality issues. If it were my car I'd go Borgenson. Contact Bergman Auto craft they are a sponsor here.

You save weight and space and get accurate steering.

 

[Mopar Hunter]

If it were my car I'd go Borgenson. Contact Bergman Auto craft they are a sponsor here.

You save weight and space and get accurate steering.

X2

I installed a Borgeson box in a friends car, it was one of the best improvements to his Charger. I’m getting ready to install mine hopefully this Spring.

 

[ckessel]

Yeah, is there a reason that you do not want to have it rebuilt? Steer&Gear in Ohio or there's a place up in Minnesota.

That would be Lares. Rebuilt stocker or their own new of their design. I have the new on my 67 wagon.