WTB Power Window Setup

[Jerry Hall]

I have a 68 Coronet R/T that was originally power windows. All parts were changed to manual windows at some point in time. Before I start a restoration I would like to have everything needed to bring it back to power windows. Regulators, switches, motors, and harnesses. Sort of a rare car 440, 4-speed, non-rally dash, and buckets with buddy seat.

 

[PurpleBeeper]

You will need a lot of stuff. You might want to take a look inside your doors/quarters to see if the power window up-stop & down-stop are still there....could save you a little bit of money. Wiring harness might still be in the car too, or part of it anyway.

 

[6pktgo]

I have a complete setup & some extra parts , but shipping may be a killer, it`s a lot of parts ( I posted one picture of the quarter windows setup) , Where in Alabama are you? Start a conversation

 

[chtampa]

I have the front and rear down stops.

Also may have a pair of door glass window lift brackets.

 

[Jerry Hall]

Thanks for the replies. I think that part of the harnesses may be there as I can see where it was cut going into the doors. Some other things may be inside as I haven't pulled the door panels. The car is still in rust free driver condition and matching numbers. Some trashy restoration and a poor quality paint job was done I don't know how many years ago. I was planning on driving and enjoying while gathering some parts, but seeing the replies I probably need to know more about what I actually need. Thanks to all .

 

[Jerry Hall]