Reproduction Upper Contorl Arms?

[superbeedave]

Hey all, Been a while since my last post. Looking to buy a new pair of the reproduction Upper control arms with the ball joints already installed on them for my 69 Bee. Who should I buy from to make sure they will fit properly and are not more that $150.00 a pair? Also how can I get the caster and camber close enough to be able to drive it to the alignment shop? Thanks, Dave

 

[451Mopar]

I don't know about the reproduction control arms, but for alignment I have used this SPC Performance FasTrak Caster/Camber tool, and did the toe with a tape measure (front and rear of tire difference.)
http://www.summitracing.com/parts/sps-91000?seid=srese1&gclid=COXg04eluMgCFZWHaQodWu8Lfg

 

[bigmanjbmopar]

Call PST a vendor here on this site @P-S-T

 

[gtxno1]

Just index the adjustable caster and camber bolts before removal and put them back in the same positions and you should be close to perfect

 

[MT_Mopar]

Here's some:

http://www.ebay.com/itm/1962-72-Mop...rms-/121728061073?hash=item1c578ece91&vxp=mtr

http://www.ebay.com/itm/65-72-Mopar...88e07e2&pid=100033&rk=2&rkt=4&sd=121728061073

 

[superbeedave]

Thanks guy's, good stuff there!

 

[coloradodave]

Don't forget to mention FBBO for a discount at PST...

 

[superbeedave]

Hey guy's, I purchased the upper control arms and now I need new bumper stops. I bought energy's off ebay
and they appear to be too tall. Anyone ever run into this problem? Plus the new stops didn't have the nut on the
stud up against the rubber that fits into the bracket square cutout. Can anyone help? Thanks, Dave