RonFloyd
Active Member
- Local time
- 9:40 AM
- Joined
- Jul 31, 2019
- Messages
- 36
- Reaction score
- 73
- Location
- Putnam County ,Indiana
I have been struggling to get this motor to run right. First it wouldn't hold a time the timing mark jumped around on the balancer . So I changed the whole ignition system and it holds the timing mark great now but Still not running right. I hear a slight popping from number 2 cylinder so I pulled valve cover and see this. I am new to mopar engines but I would say the rockers should be centered on valve stem. Is there spacers or something that should be between these rockers? I am thinking this could possibly change cam lift and maybe even cause extra wear on guides by not being centered. Or am I overthinking this. Sorry for the long post but Like I said this is my first mopar and want it right. It is a 68 383 in my 65 Coronet