Rosette Rivets... Some of you might like this...

[1 Wild R/T]

I was kinda surprised to discover Amazon sells Rosette Rivets... Compared to restoration suppliers they are cheap...
https://www.amazon.com/Rosette-Rive...8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1

 

[eldubb440]

they should be cheap, they're only rivets

 

[pnora]

Good deal. Most give the shaft without a reach around.

 

[dadsbee]

Clicking that link it gives me $42.89 CDN from Amazon.ca !

I bought a dozen a couple years back for less than 5 bucks. You can also make them pretty easy in a mill.

 

[pnora]

Clicking that link it gives me $42.89 CDN from Amazon.ca !

I bought a dozen a couple years back for less than 5 bucks. You can also make them pretty easy in a mill.

13.99 US free ship.

 

[1 Wild R/T]

Clicking that link it gives me $42.89 CDN from Amazon.ca !

Not the same link, but another that is on the first link... Eight instead of four...

 

[Mopar Hunter]

I heard some people complain about those being thinner and flatter than the regular Mopar ones.

 

[Dan64]

I just used them on a 87' w150 that I had to swap out the dash on, looked/ worked good enough to me ( for a 87' w150 anyway).

 

[Dave6T4]

I remember being at the Mopar Nationals back in the '80's. A vendor there had a nail keg full of those rivets for $1.00 each!