• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Seat belts

Johnny Z

Member
Local time
4:04 PM
Joined
Jan 11, 2021
Messages
23
Reaction score
7
Location
NW Ill
I have a 67 charger with a 66 interior. What brackets do I need to mount the seat belts? I found a slot on the lower side of the counsel, and located the mounting bolt. Is there a bracket that gets bolted to the fennel and the belt anchor bolt to it? Any help will be appreciated! Thanks
 
They really just get bolted to the floor with bolts that let them rotate (anchor bolt).
 
thanks. I found a diagram for the 66 counsel, and there is a seat belt bracket that brings the anchor point outwards to the side. I need to find those brackets. Let me know if there available. Thanks
 
Looking for a set of these?

1767711567928.png
 
Ah, yeah. Would have to get off another car or if someone has it already taken off. Or make one? I have a 66 that I will be bringing home to get parts off in the spring.
 
Ah, yeah. Would have to get off another car or if someone has it already taken off. Or make one? I have a 66 that I will be bringing home to get parts off in the spring.
Well, let me know if you’re willing to part with them, unless someone has a pair available. Let me know. Thanks
 
Well, let me know if you’re willing to part with them, unless someone has a pair available. Let me know. Thanks
There's just one on the drivers side because of the trans tunnel offset. And it's welded on as part of the car.
When I converted my 67, I just used the original hole and it works perfectly fine.
 
Back
Top