Six Pak type air cleaner for 4 BBL?

[Plymouth71]

I picked up a 4 barrel base plate from a swap meet for $20.00 I'm wondering which air cleaner I would need? I know there are different distances between the holes. How do I figure this out?

 

[iraqivet01]

Mancini's racing sells the other parts you'll need. (Lid & filter)

 

[Photon440]

That base is the same as mine, which is for a 1970 road runner with air grabber. It uses the round filter and lid.
http://www.nicksgarage.com/aircleaner.htm
There are pictures on this link. It helps you to find out if you have the 383 or 440 version.

 

[Plymouth71]

Ok, here is the actual pics. I think there for a 69 fresh air hood. crap.

 

[bigmanjbmopar]

It's fiberglass cool. light weight. are you putting it on a 383? and just an FYI it's not a six pack style but called an air grabber (Plymouth) style base. Use the link to nicks garage it shows it all and the filter # to buy for it.

 

[moparmarks]

For 70-72 Air Grabber and Ramcharger fresh air hoods and 4-bbl carb.

 

[Plymouth71]

looking at Nick's Garage it looks like the 69 version. I want to use it on my 71. do you think I can modify it to work?

 

[moparmarks]

Your right. Had to look again
Top picture is the 70-2 style with the round air cleaner.
Bottom one is 69 and takes the oval air cleaner.
Should be able to use it

 

[Plymouth71]

Ummm. they are the same one actually, top and underside pics

 

[Scotty]

Do these air cleaners interfere with 2 speed wiper motors if used with a big block in a 69 Coro?

 

[moparmarks]

Ummm. they are the same one actually, top and underside pics

The one in the first pic is different than the one in the 2nd two pics.

 

[Plymouth71]

Sorry, yes the very first pic was going off my memory and is not a picture of what I have.The second set of pics are the one base plate I purchased on the weekend.

 

[69 GTX]

I believe that it interfers with the 2 speed wiper motor, I think.