• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Square flasher

vinny719

Active Member
Local time
5:14 PM
Joined
Nov 1, 2025
Messages
25
Reaction score
19
Location
New York
Why is my flasher square not round and I got 3 out of 4 blinkers blinking but it’s a fast blink and I don’t here the flasher clicking any ideas thanks vinny
67 Coronet R/T
IMG_0678.png


IMG_0677.png
 
3 out of 4 isn’t a flasher issue. Likely a bulb. Square or round is fine. Assume your checking the 4 ways and not turn signals. What does your turn signals do? All 4 or just same 3?
 
LOL !! I installed LED taillights. The flashers/signals weren't working. I bought 6 new relays of different types - electronic ones, ones with ground pigtails and a few more. Ended up using both originals (one round one square) but one needed the leads flipped. AND, they will only work where they're installed - they can't be swapped.

Yeah, weird !!! Good luck !
 
For some reason, hazzard flasher provider was different than the turnings flasher as far I know, hence why hazzards is square and turnings are round.

HOWEVER that seems to be a replacement piece, not the factory one.

As mentioned, your fail is not related to flashers. Could be switch or bulb.. or ground related to the missed side.

On a side note, which corner doesn’t blink with hazzards? Does work with tunings?
 
Back
Top