Starter access - Doug's 383 Headers '69 Bee

[MikeyM]

Hi all,

Looking for input on starter removal / installation with Doug's 1.75 inch headers. I have a new big, huge, gear reduction starter and will be installing the headers within the next month or so. If I can use the existing starter without it being a huge PITA, great. if not, I have no problem in picking up one of the smaller units. Also, which of the mini starters work / fit the best? I've read mid-90s - 2000 Dodge Dakota with 5.2 but wanted to confirm. I already have the terminal relocation kit.

Thanks,
Mikey

 

[4mulas]

Do yourself a favour and get the Dakota starter. Do a search using the search function. Many posts on this over time.

 

[icetech]

Grab this... this one comes with the adapter to move the terminals away from the block (which is an issue in some cases) Also won't sound like the old gear reduction starter.

ACDELCO 3371096 Starter Motor | Shop Now at RockAuto

ACDELCO Electrical Parts and More for Your Vehicle at Reliably Low Prices. Fast Online Catalog. DIY-Easy. Your Choice of Quality. Full Manufacturer Warranty.

www.rockauto.com

 

[4mulas]

Grab this... this one comes with the adapter to move the terminals away from the block (which is an issue in some cases) Also won't sound like the old gear reduction starter.

http://[URL]https://www.rockauto.com/en/parts/acdelco,3371096,starter+motor,4152

[/URL]

View attachment 2012906

I have found that on low deck motors I have to remove the terminal extension/repositioner as it puts the cables too close to the block. I remove it and then bolt the cables directly to the original two lugs. You can still use the little plastic protector thing too if memory serves….

 

[MikeyM]

Awesome. Thanks guys.

Mikey

 

[Some Car Guy]

I have found that on low deck motors I have to remove the terminal extension/repositioner as it puts the cables too close to the block. I remove it and then bolt the cables directly to the original two lugs. You can still use the little plastic protector thing too if memory serves….

This was my experience on a 383 and on a 440 I had to order the adapter.