Of the 6 holes, 3 are stripped. All on the same side. Doesn't seem to be enough room to get a nut on the back side. Any other tips on how to remove the balancer now that I can't use my standard bird-foot shaped puller?
Side note, 2 were already stripped. The bolt pulled out of the 3rd hole when trying to pull the balancer with the standard universal puller from the parts store. Is this motor not supposed to use the normal style puller?
Side note, 2 were already stripped. The bolt pulled out of the 3rd hole when trying to pull the balancer with the standard universal puller from the parts store. Is this motor not supposed to use the normal style puller?