Stroker Billet crank

[A-12.F6]

I'm selling a Bryant Racing billet crank, 4.375 stroke, knife edged, oil holes are chamferd. B/RB, was built for a 426 Hemi, 8 holes for flywheel, it's in perfect condition, journals have been turned .10/.10.
local pick up only, these cranks are custom made and run $3,000 new, asking $750.00

 

[snakeoil24]

beautiful quality

 

[A-12.F6]

More pics. I can ship to states that have Spee Dee, MN, WI, IA, Il, ND, SD.
Beyer to pay shipping.

 

[A-12.F6]

$600.00

 

[Cranky]

And I have an 8 bolt flywheel for it that I'll let go of for 300.... http://www.forbbodiesonly.com/moparforum/showthread.php?t=28353

 

[RustyRatRod]

Is the crank crack free?

 

[A-12.F6]

Yes, it was completely checked before the journals where turned.

 

[RustyRatRod]

Yes, it was completely checked before the journals where turned.

Thank you. You have a PM.

 

[A-12.F6]

The machine work was done by Crankshaft supply in Minneapolis MN.

 

[Hemirunner]

That's a blown alcohol crank. It has no provisions to center a stock style flywheel or a converter snout. Just so you guys know what you're buying...

 

[A-12.F6]

That's a blown alcohol crank. It has no provisions to center a stock style flywheel or a converter snout. Just so you guys know what you're buying...

It's accually a blown nitro crank!!

 

[A-12.F6]

Comes with new bearings, Speed Pro 8-7300SHA 10 rod and Federal-Mogul 4095 M 10 main.

 

[rev.ronnie]

The machine work was done by Crankshaft supply in Minneapolis MN.

If there is any question to the quality of the magnaflux and grinding, I will add that Crankshaft Supply is the best crankshaft shop in the upper Midwest. I have bean dealing with them for almost 30 years. Roger would have done the work on this crank and he is the best.

 

[A-12.F6]

bump

 

[A-12.F6]

bump

 

[BCBOUND]

Can crankshaft supply weld in a stock flywheel/converter regieter and turn it down so a stock flywheel will fit and wont explode ??

 

[A-12.F6]

You would have to call them and see if they could.