Tailshaft seal, A833

[rr70]

Hello!
Can someone tell me if this is right?
I remover the seal in the end of the trans and there is a small hole
on the side of the bushing.

 

[69Bee]

That is normal, and causes no issues. You can use the hole to deform the bushing, facilitating replacement without taking the housing off.

 

[Beekeeper]

line the hole in the bushing with the galley in the tailshaft this allows lubrication of
the yoke. use a bushing puller to remove the old bushing and the install tool to
install. I have both tools if you want to see a pic

 

[rr70]

Thanks guys! so no need to worry then!
Actually i´ll just be replacing the oil seal.