FOUND Thermo-Quad Choke Control Little Spring

[Dibbons]

Need missing spring as shown in carb kit diagram photos #1 and #2 (or if a forum member can provide a source for such spring that would be nice as well). #3 photo shows my '72 340 6139S Thermo-Quad where the missing spring should be on the left hook and on the bottom hole. Then #4 photo shows '71 with small spring; #5 photo shows '72 without spring but with spring slot now replaced by a spring hole; #6 photo shows '72 with large spring. Hard to say what is a factory spring size and what is not at this point. Thank you.

 

[Vaanth]

Carter Choke Pull-off Back Spring​

 

[Dibbons]

Thank you but that website won't load for me and putting quadrajetparts.com won't work either for some reason. It maybe due to my Mexico location which causes problems from time to time.

 

[Vaanth]

Thank you but that website won't load for me and putting quadrajetparts.com won't work either for some reason. It maybe due to my Mexico location which causes problems from time to time.

Here is a screenshot of the spring page:

Contact Information:
QuadrajetParts.com
36 Mount Pleasant Road
Suite #2
Columbia, NJ 07832
E: [email protected]

No listed phone number though.



Also try Mike's Carburetor Parts: Carter BB Choke Pulloff Spring 66-10

Description is for Carter BBS, but it is listed under Thermo-Quad parts too.

Mike's Carburetor & Injector Parts
15 NE Cascade AVE,
Chehalis, WA. 98532
US

Phone
888 689-9758

email
[email protected]

 

[Dibbons]

Thanks I will follow up on the leads.