Hi all,
the SUper Bee was running pretty hot (per the temp gauge) while sitting in some bumber to bumber traffic. I bought a 12" thermostatically controlled fan which I am installing as a push through. I have most of the wiring completed, but I have a question...
They sent me a temperature sensor to install which I would connect the fan to so it comes on at 180 degrees. My question is, can I splice into the existing wire from the existing temperature sending unit to the dash temp gauge to control the fans? I don't want to have to install another sending unit somewhere to control the fans.
Thanks!!
Bob
the SUper Bee was running pretty hot (per the temp gauge) while sitting in some bumber to bumber traffic. I bought a 12" thermostatically controlled fan which I am installing as a push through. I have most of the wiring completed, but I have a question...
They sent me a temperature sensor to install which I would connect the fan to so it comes on at 180 degrees. My question is, can I splice into the existing wire from the existing temperature sending unit to the dash temp gauge to control the fans? I don't want to have to install another sending unit somewhere to control the fans.
Thanks!!
Bob