Throttle cable help for 69 b body 440

[Jessejames]

Running the Torker II on a charger. Anyone running this intake? What length throttle cable are you running? Mancini is out of them... Any suggestions on another place?
Thanks in advance!

 

[Tman100]

You could try national moparts. I got my throttle cable from them for my charger.

 

[moparedtn]

I would imagine which carb you're running would matter as well?

 

[hunt2elk]

Mega Parts has a good variety.
https://www.megapartsusa.com/products.php?cat=201

 

[493 Mike]

If the cable is a little too short, a piece of flat stock with a hole in each end will span the gap and works well. I have used many over the years.
Mike

 

[pnora]

See if they have this cable. This is longer with a longer stroke. A lot of cables have to short of stroke.
MRE8668

 

[pnora]

Running the Torker II on a charger. Anyone running this intake? What length throttle cable are you running? Mancini is out of them... Any suggestions on another place?
Thanks in advance!

I might have a new cc-371 from Mancini. I would have to look.

 

[HEMI-ITIS]

I used the Lokar cable.

 

[dvw]

The 6 cylinder cable is the longest. It’ll reach a crossram. The E Bay $25 braided cable works nice. But they require a little mod at the pedal attachment. And a custom carb bracket.
Doug

 

[4mulas]

https://www.rockauto.com/en/moreinfo.php?pk=4218210&cc=1499090&pt=5892&jsn=670

 

[HEMI-ITIS]

The 6 cylinder cable is the longest. It’ll reach a crossram. The E Bay $25 braided cable works nice. But they require a little mod at the pedal attachment. And a custom carb bracket.
Doug

View attachment 1255444

View attachment 1255441 View attachment 1255442 View attachment 1255443

Sure looks like Lokar products

 

[HEMI-ITIS]

 

[dvw]

Sure looks like Lokar products

You know me, cheap. The only part that was suspect was the ball stud at the carb. It was thin. Replaced it with a thick one. Other than that it is a nice piece.
Doug