- Local time
- 7:23 AM
- Joined
- Mar 28, 2014
- Messages
- 33,793
- Reaction score
- 53,664
- Location
- South Louisiana
The answer to this doesn't seem to be as straightforward as I would think.
I have a V-Code, TrackPak, 440 6bbl, 18 spline 4 speed, Dana 60 equipped 70 Roadrunner.
I realize that TrackPak = Dana 60, but I am providing as much info as possible.
What size is the "cross" on the front and rear U-joints, the cap diameters, and the strongest U-joint (Spicer?)
I'm thinking that should be the same for all cars equipped that way.
I will measure once I pull the car out, on jackstands, and get my tape, but I am short of time.
Thanks.
I have a V-Code, TrackPak, 440 6bbl, 18 spline 4 speed, Dana 60 equipped 70 Roadrunner.
I realize that TrackPak = Dana 60, but I am providing as much info as possible.
What size is the "cross" on the front and rear U-joints, the cap diameters, and the strongest U-joint (Spicer?)
I'm thinking that should be the same for all cars equipped that way.
I will measure once I pull the car out, on jackstands, and get my tape, but I am short of time.
Thanks.