• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

vert rear seat belt hole location?

Geff McCarthy

FBBO Gold Member
FBBO Gold Member
Local time
11:56 PM
Joined
Aug 5, 2019
Messages
372
Reaction score
222
Location
Portland OR
my 63 has front belts, but i want to add rear belts. Anyone know of a recommended location to drill? I can measure the distance and angle of the front belts, but would prefer the factory recommendation.
 
my 63 has front belts, but i want to add rear belts. Anyone know of a recommended location to drill? I can measure the distance and angle of the front belts, but would prefer the factory recommendation.
I will try to take some pictures since my back seat is out right now. On a 66-70, the rear interior panels have a square cour out at the bottom (can’t see the cut outs with the seat installed). Behind the square hole is a piece of vertical steel (maybe 3” x 3”) that has a large nut welded to it and the steel piece is welded to the floorboard
 
I will try to take some pictures since my back seat is out right now. On a 66-70, the rear interior panels have a square cour out at the bottom (can’t see the cut outs with the seat installed). Behind the square hole is a piece of vertical steel (maybe 3” x 3”) that has a large nut welded to it and the steel piece is welded to the floorboard
Here's a picture of a 66 . They go straight into the back.
20240725_124951.jpg
 
Where they go through the floorpan There is a large plate with a nut welded to it so they won't tear through the sheetmetal

1970 brought changes to the rear seat belts never seen before.
 
Auto Transport Service
Back
Top