• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB Vintage 8 3/4 MoPar NASCAR gear - looking for 90 degree fitting

Status
Not open for further replies.
odcics.....I checked at work and we have 3/8" pipe to 1/2" flare with the Weatherhead logo....but not the 3/8" pipe to 5/8" flare version.
 
odcicis : I checked at my supplier as well and found the same sizes in question, 3/8 pipe thread x 1/2 flared x 90 degree. all brass fitting.
Just no markings on them.
 
Last edited:
timing....lol.
i literally had to pick apart a pile of brass out of the floor itself in this garage today.
will let you know,theres some in there but i didnt have a light to see if logoed.
ill look tomm when we are putting all this stuff away.
deffo was thinking of you immediately.

also,i scored some older cabinets that are cool,and a coke cooler and stand,
as well as what i think? is a alum buick motor w 2 speed trans.
one of the absolute coolest discoveries,
was finding an entire crate of 1937 NoS dodge Rod bearings in their boxes!

022.JPG

023.JPG

001.JPG


018.JPG


006.JPG
 
Looks like you found a perfectly good dog there too! :thumbsup::thumbsup::thumbsup:
 
Found the 90 degree fittings, still need vintage brass hose ends.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top