WTB Wanted 68-70 convertible inside windshield trim

[erickson]

looking for a drivers side 68-70 convertible inside plastic pillar trim Picture shows the passenger side. I will buy both sides if available Color not important
Thanks

 

[493 Mike]

looking for a drivers side 68-70 convertible inside plastic pillar trim Picture shows the passenger side. I will buy both sides if available Color not important
Thanks

What picture?
Mike

 

[erickson]

Sorry I thought I loaded it

 

[QuickBpBp]

Tony’s parts did reproduce them. Don’t know if there are any left…

 

[erickson]

THANKS I WILL LOOK

 

[erickson]

They only make hardtop, not convertible

 

[QuickBpBp]

They only make hardtop, not convertible

Ok he was doing convertible ones. Must have sold out.

 

[haywire 440]

The convertible replacement ones did sell out, I had bought a set from Tony’s. There were a few on eBay for awhile but are hard to find now.

I had seen mentioned on this site that some people were using the 4-door b-body moldings and creating their own. I have a set from a ‘68 Coronet 4-door if you want to try.

 

[SgtSuperbird]

For my own knowledge...are the 4 door and convertible pieces taller than a 2 door?

 

[QuickBpBp]

For my own knowledge...are the 4 door and convertible pieces taller than a 2 door?

Yes they are taller. Also why 4dr wipers are the same as convertible..

 

[erickson]

What do you want for the four door set?

Thanks