WANTED Looking for a crossram intake for a 440

[64 Polara]

Hi guys,

looking for a crossram intake for my new project. Engine is a 440. I think with 906 heads.

So intake should fit with my applications.

-intake with or without carbs

offers welcome

 

[moparsteve636]

A-A Transmissions, Rick has a M/W cross ram intake for the stock port heads! He also has everything to use it.

 

[Al K]

Wasn't there one in this section? Check back a page or two and you might see the ad. I didn't check it out,so I don't know if it was an original(or A&A) piece for MW ports or one for the standard ports. Good luck!

 

[Mr4Speed]

Wasn't there one in this section? Check back a page or two and you might see the ad. I didn't check it out,so I don't know if it was an original(or A&A) piece for MW ports or one for the standard ports. Good luck!

thanks 4 the reply; those parts were already sold i believe!

 

[kansas connections]

hello - have str -14 crossram with two edelbrock carbs, with some linkage and no air cleaners . carbs are 750 cfm or could supply 625 cfm carbs. clean unit , top has been professionally repaired , can hardly see. will only sell complete . $1500.00 plus trip cost. fits rb mopar 413 426 440 with stock heads such as 915 906 452 516. thabks