• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

What am I missing?

gahi

Well-Known Member
Local time
7:35 AM
Joined
May 20, 2011
Messages
55
Reaction score
0
Location
Moab, UT
This is what I have.
P1030143.jpg


Here's a diagram for a '66 and I'm wondering if the '67 has the same parts? Does the '67 have the airshield? Does it hold anything else on or can I run without it?
1966_Plymouth_Service_Manualpg670.jpg


So I need?
Bumper and brackets
grill panel
grill and bezels
airshield?
 
does it just deflect air around the radiator support?
 
anyone want to take a pic of their's? I'm trying to figure if I should be on the lookout for one.

this car for instance, doesn't appear to have one.
1967_plymouth_gtx_2_door_hardtop_m.jpg
 
I have a 67 and am looking that panel right now, two bolts attach it to the lower radiator support but nothing else is attached anywhere. Btw, that pic above has the wrong angle so you wouldn't be able to see it anyway. Maybe a condenser attaches to it? I'm not sure, I don't have air but it does have 7 holes in the front of it...???
Edit: maybe it blocks air from bypassing the radiator from below.
 
I took mine off...I figure i,m not going to drive on gravel roads anyway...Put an air dam on it...pushes air into the radiator...Saw an ad for 66 plymouth...it was a drag car with the similar setup I did...I,ll sell you mine for 35 bucks plus shipping..
Petty Blue 67 gtx
 

Attachments

  • 100_0507.jpg
    100_0507.jpg
    111.8 KB · Views: 316
Thanks everyone, I'm going to run with out it.
 
A quick look at what your missing.
 

Attachments

  • air dam.jpg
    air dam.jpg
    56.1 KB · Views: 262
Auto Transport Service
Back
Top