What is the easiest efi setup for a carb dummy?

[hudsonhornet7x]

I am looking for an easy efi conversion. So far I have seen the MS3 hemi box and the holley hp efi. Should I consider anything else. Self tuning is important as I have NO idea how to tune efi. Thanks!

 

[usaroadrunner]

check into fi-tech fuel injection. its in one of the latest mopar magazine. i have seen it on tv when they built a 500ci stroker mopar motor. completely self learning computer is built in side of throttle body. i believe its good up to 600hp. everyone says its a badass setup. hope this helps ya out. MOPAR BABY.

 

[texas69bee]

Holley came out with the sniper as of today. Looks like a good easy setup.

 

[HawkRod]

I installed a FAST EFI system. It was not easy, but most of the issues related to an ECU problem. I hate to say it, but I don't recommend it. My system also controls timing though, so that added some complexity.

An EFI system, regardless of what you choose, needs to be thoughtfully and carefully installed. Don't take short cuts and I bet you'll be fine with most systems out there. I have heard good things about the FITech system from a coupe of guys. I think this system builds the ECU into the throttle body, which minimizes wiring hassles.

Good Luck,

Hawk

 

[hudsonhornet7x]

Thank you guys for the help. My cam has a 108 lsa so I hope one of these systems can handle it.

 

[Johnny Mac]

here is a FABO thread worth a read. any questions let me know.
http://www.forabodiesonly.com/mopar/threads/fitech-efi-system.321984/page-36#post-1971281099

 

[Hemirunner]

We have a fi-tech on order. It looks really simple to install and configure.

 

[Cranky]

FI for a tunnel ram? Man, I have two pairs of TR carbs and well, I'm going to do my best to use them one more time lol

 

[ws23jrt]

Mass-flo is one that I'm working with. (haven't yet started the engine)
It's supposed to be plug and play.
My kit is for a 426/472 hemi. Stock cam and 10/1 comp.-- I'm using an 80mm throttle body that feeds the bottom of the intake manifold which should not be a problem because the system is point injected.

http://www.hotrod.com/how-to/engine/hppp-0710-mass-flo-electronic-fuel-injection/

 

[MT_Mopar]

Fi Tech: http://www.powernationtv.com/episode/EP2016-10/mopar-magic

 

[69Runner]

Fi Tech: http://www.powernationtv.com/episode/EP2016-10/mopar-magic

Who doesn't like a good engine-build video! Especially on a Mopar. At 6 minutes they install the valley pan seemingly without any sealant and definitely without the bars. Never seen that before. Just a minor detail I know, overall it looks like a slick build and the guys sound knowledgeable.

 

[drobertson]

I ordered my fitech system awhile ago for my 318. My only complaint so far is how much they are backordered!

 

[Car Nut]

I ordered my fitech system awhile ago for my 318. My only complaint so far is how much they are backordered!

Who did you order it from?

 

[Johnny Mac]

Pace performance orders are filled before any other vendor. I have some in stock pending what unit you are looking for. The fcc is the biggest lead time, due to a product revision.

http://paceperformance.com/b-94025-fitech-fuel-injection.html

 

[drobertson]

Who did you order it from?

Jegs. I should get mine in about a month. And I ordered it 2 weeks ago.