Wheel bearing dust cap help please

[Morrie01]

I bought a standard 45mm bearing dust cap for my front wheels and they aren't deep enough (30mm) to fit.
What do you all run that works/fits and can you please provide links.
I didnt think it would be hard to find something.
Needs to be about 40mm + deep.

Thanks

 

[toolmanmike]

I bought a standard 45mm bearing dust cap for my front wheels and they aren't deep enough (30mm) to fit.
What do you all run that works/fits and can you please provide links.
I didnt think it would be hard to find something.
Needs to be about 40mm + deep.

Thanks

View attachment 1927059

This is the standard dust cap. Are you running stock hubs? Drum or disc and are they aftermarket?Front Wheel Bearing Dust Caps 1964-72 Exc 9" Brakes, Front Wheel Dust Caps, 101-DC3416PR Reproduction, NOS and Used Mopar Muscle Car Parts

 

[Morrie01]

Ad far as I am aware. They are stock front disc

 

[Lefty71]

Have to agree....i thought Rockauto and everyone else would have them readily available as well. But when i was searching a few months back for 60's drum hubs, they were scarce....seems only universal chrome ones kept popping up.

 

[Cranky]

Have to agree....i thought Rockauto and everyone else would have them readily available as well. But when i was searching a few months back for 60's drum hubs, they were scarce....seems only universal chrome ones kept popping up.

RA and many others sources most of their stuff offshore (ie China etc ) so anything that's not from here might not fit....

 

[gkent]

I used Dorman's ... p/n 13996

You really need something that will knock them in evenly around the lip. Otherwise they just dent if you try tapping them in.

 

[64BEL]

I bought mine from Rick Ehrenberg. They fit well.
NOS Mopar Front Wheel Bearing Grease Dust Cap 1972-down A, C, E-Body Cuda Dart + | eBay

I also bought a driver for them from him, but he doesn't have them on his site anymore. It's like this one from Mancini.
MRE - Spindle Dust Cap Driver

 

[Kern Dog]

An oversize socket works....or a short section of exhaust pipe.

 

[Morrie01]

I bought mine from Rick Ehrenberg. They fit well.
NOS Mopar Front Wheel Bearing Grease Dust Cap 1972-down A, C, E-Body Cuda Dart + | eBay

I also bought a driver for them from him, but he doesn't have them on his site anymore. It's like this one from Mancini.
MRE - Spindle Dust Cap Driver

Hey mate, any chance you can tell me what the OD measures of these.
I ordered some from a local supplier and they turned up with an OD of 40mm which didnt fit. I need them to be about 42.5 - 43mm. Will order from your link if they are correct.

 

[1967coronet]

My old ones were dinged up, went to napa they had a pair the next day.
I pitched the boxs or I would have a # for you.