I need to replace this fix a garage must have done before I bought the car in 2004. I’d like to get one with the ring connector on the end like this Ford part. But I need 16 Ga. Does anyone know where to get one? Thanks!
Where to get a 16 gauge fusible link.
- Thread starter 440 PHIXX
- Start date
- Local time
- 6:36 AM
- Joined
- Jun 12, 2012
- Messages
- 35,169
- Reaction score
- 94,261
- Location
- NZ - just short of the South Pole
Thanks! The Dorman one I see looks like the eyelet isn’t big enough. It has to be 3/8” to fit over the stud. I have one in my parts box that I could buy the ends for but that look easier to pop on.
Oh shoot... that is for a 1/4” stud. Still looking. I may have to put the ends on the one I have.
It looks like the Ford is 5/16 and the GM is 1/4. Mopar... make your own. Mopar is 3/8.
Mopar is 3/8.
- Local time
- 6:36 AM
- Joined
- Jun 12, 2012
- Messages
- 35,169
- Reaction score
- 94,261
- Location
- NZ - just short of the South Pole
You can buy just the wire and make your own...Autozone shows a 9' length of wire only.
https://www.autozone.com/electrical...bussmann-16-gauge-fusible-link-wire/32376_0_0
I found the one I need! Thanks guys! You sent me on the right track kiwi... I searched Pico on eBay and found this.
I do have this that I could have put ends on. The stud on the Mopar relay is 5/16. It helps to measure!
Similar threads
