Windshield removal:

[Erik Morris]

Pulling windshield to gain access to entire interior and fully remove all dash components. When the windshield is ready to go back in, are there two seals that are needed or only one? Classic Industries seems to indicate that the following might both be required. One appears a custom shaped sleeve and the other is a butyl tube. Insight?
https://www.classicindustries.com/product/1969/dodge/charger/parts/mb1261.html
https://www.classicindustries.com/product/1969/dodge/charger/parts/k4122.html

 

[Jerry Hall]

The first link is correct for the front windshield. The second link would be for the rear glass.

 

[dadsbee]

Precision is the mfg of the front glass seal you want ! I won't get into "where to shop" !

WCR-D715 is the part #

 

[Erik Morris]

The first link is correct for the front windshield. The second link would be for the rear glass.

Thanks for the clarity, as C.I. lists link 2 as being for front OR rear glass installs.

 

[Jerry Hall]

Thanks for the clarity, as C.I. lists link 2 as being for front OR rear glass installs.

In 68-70 B body Mopars, where you posted this, what I posted is correct. Some later models may use that second link for the front, but that I don't know.