Wiper linkage wavy thrust washer under retainer clip. HELP!

[zyzzyx]

Can anyone help me source the wavy thrust washer that's directly under the retainer clip
on my wiper linkage? 68 GTX. Can't find the original, ( I will later! ) Thought I could pick
one up at the hardware store, but no luck! Thanks!

 

[Mike67]

https://www.detroitmuscletechnologi...E5GINZ1fy2TbsnVX8nFIRAcDj4Ohmm9UaAogiEALw_wcB

 

[zyzzyx]

Thanks Mike, but the thrust washer is not in their assembly. It lives just under the gold plated retainer.
DMT doesn't have it in that assembly. It's about a 0.020 thick wavy washer that takes up the slop in
the linkage.

 

[zyzzyx]

 

[Pistol Pete]

https://www.mcmaster.com/spring-washers/

 

[zyzzyx]

Yeah, McMaster is close to me but you have to buy a box of a hundred or so.
I'll chech it out though. Thanks!

 

[Mike67]

View attachment 1137787

There is a kit on Amazon for $12 that has various sizes . I'm not sure of the pin diameter but it may work just search "Wave Washer".

 

[zyzzyx]

The I.D. is 3/8". I'll take a lookie, Thanks!

 

[Pistol Pete]

Yeah, McMaster is close to me but you have to buy a box of a hundred or so.
I'll chech it out though. Thanks!

I'm seeing packs of 5 or 10 on a 3/8" washer

 

[zyzzyx]

I'll take a run to McMaster later in the week and pick up a ten pack. Thanks!