Just to give an up date all the electrical wiring is done. Had a problem with my horn not wanting to work. So had to pull the horn pad and clean my contacts under it. Got the steering wheel and horn pad used. After cleaning the contact area now work's fine. Only problem with the harness under dash they did not include the wire for the revers light under the dash on the 69 runner. Went up and grabbed my old harness and sure enough had the wire marked and got it out of the bulk head connector and cleaned the connector well. Put it into the bulk head connector and all worked well. Down to the finish point on car not much left to do. Past week end my glass guy and I tried to install the front window but seems the glass is too big so he ripped the gasket and have ordered another one to try again. We will cut the glass down some and may be that will help it go in. Is their any way to pre measure the glass for fitment. Well got to go and bleed my brake system today and get that checked off list.