WTB: Baffled gas tank with sump/pump

[TruBee]

Anybody know of any company putting out a stock looking/application baffled fuel tank with a sump/pump for a '69 Coronet? Thanks in advance for your consideration.

Pete

 

[dangina]

I looked into this about a month or two back - prepare to grab your ankles because it ain't cheap. Cheap starts at over a grand...

 

[dpstark2]

A could of options: http://rickstanks.com/ will modify a tank for you.
Tanks Inc. had units you can add to your tank (with fab) http://www.tanksinc.com/index.cfm/p...category_id=61/home_id=-1/mode=prod/prd84.htm
Competition engineering makes a weld on sump, but does not include provisions for an in-tank pump: http://www.summitracing.com/search/Product-Line/Competition-Engineering-Fuel-Tank-Sump-Kits/

Or you can make your own... As far as I know, no one makes a complete drop in uint. Hope that helps- I'm going the DIY route and it's cheaper, but a lot more work.

 

[5.7 hemi]

I would use the tanksinc stuff, actually I am, and I have no complaints.

 

[Malicious]

+1 build it yourself, if you can weld, its an easy job. I just notched a fuel tank from another non mopar EFI car. After leak testing I used a tank sealant for extra security. quick easy cheap.

http://www.kbs-coatings.com/tank-sealers.html