WTB - Dash support rods for 4-speed pedals

[doberjoe]

I'm piecing together my 68 GTX, 4-speed car, and need the 3-piece set of support rods that stiffen the pedal assembly to the dash frame. Basically 3 rods with flattened ends and holes to mount to the pedal assembly.

Does anyone know where I can find a set?

Is the 4-speed set unique, or is this the same as the automatics?

Thanks!

 

[RemCharger]

They are unique. You've tried brewers?

 

[1 Wild R/T]

They are unique. You've tried brewers?

Really? My auto Coronet has them...

 

[Richard Cranium]

FOR SALE - 68-70 B body clutch pedal assembly (refurbished)

Correct for 68-69 due to no extra hole in clutch pedal for safety mechanism. Parts were bead blasted, primed with self etching primer only up to where the paint stops, with 2 coats of satin black with the overspray to mimic factory appearance. All the bare metal were coated with RPM to prevent...

www.forbbodiesonly.com

 

[Tony Tee]

I'm pretty sure they are the same as the automatic brace rods. The 4 speed unit has a extra side brace to firewall bracket, over center spring and pin. And a longer pivot shaft for the both pedals. But I'm not 100% sure .

 

[doberjoe]

Thanks, I did send an email to Brewers, hoping for a response.

They are unique. You've tried brewers?