Actually, I have 2 2dr post 66 Belvederes......but I've never seen a relatively mild hit break a pressure plate....
I would be interested in the wiper motor thanks JohnI bought this from an insurance company recently, that lost a battle with a dump truck.48k actual car, slant six stick. I needed the engine mainly for my 66' GT. Look what the hit did to the pressure plate! Lots of good parts, though.View attachment 166927View attachment 166932View attachment 166930View attachment 166931
No,the body is bent, right front is taller than the left. I was worried about the crank and mains as well. It is an actual 48k engine, So I freshened it up, got it running good, and ran it on high Idle a bunch, hours at a time. for a couple weeks. Even at -10 degrees. I kept Rotella in it, and observed. They are one tough little engine. Day after day, even when it hit 60 degrees outside, no overheating. It never smoked ,no blowby, no noise, spooky. it would start before I could let off the key. 110 lbs compression on all six hot after running at 2,000 rpm for two hours. That's all a guy can do, I guess. I will be parting it out, in order to help another that may be in better shape. I am keeping the column and gearbox, as the 440 with headers in my other 66' hit my power steering box, and I can't bring myself to taking a hammer to a nice set of Hooker competition headers, at least not yet. That's another story, But I don't see any other way to deal with the banging of the header on the box. very Irritating it is.Truly sad to see another 4 door go down
Are you going to try fixing her or you going to part it out?
I bought this from an insurance company recently, that lost a battle with a dump truck.48k actual car, slant six stick.