WANTED: Vintage spyder wheels

[C_stripes]

I am hoping to find a set of vintage spyder wheels and center caps. I want 15x7 and 15x8 with a 5x4.5 bolt circle. May take a full set of 15x7 or 15x8, but they MUST be 15's. I would like nice driver quality. Thanks.

- - - Updated - - -

Would be shipped to Utah.

 

[bm02tj]

I wanted a set of those when I bought my 73 SSB then ICBC jacked insurance so I parked it till I was 25 then got married
now I have the car home again for rebuild and still would like a set

Good luck I will be jealous

Bruce

 

[YY1]

$1000 and up.

Good luck finding anything larger than 14x6.

Center caps (if you can find them) are in the neighborhood of $100 each as well.

I've been looking since 1983, and finally found a set of 14x6 that weren't a grand.

Then I lucked into a pair of centers for $60 each, and am still looking for the last pair.

Anyone know a cheap place to "re-hoop" to 15"?

http://www.ebay.com/sch/Wheels-Tire...es&_trksid=m194&ssPageName=STRK:MEFSRCHX:SRCH

- - - Updated - - -

...and the lug holes are a non-standard size.

 

[m880cummins]

I have 1 NOS 14x6 with chrome peeling on one little spot on the lip and have a few used 15s around. They are all 5x4.5 and the 15s are basically cores. They need chrome and centers blasted (currently painted). PM me with interest

 

[moparbob71.2]

I have some 14's. The only 15's I've come across were GM pattern.Caps are tough also because they stick out further than the tire. Pull the wheel, lay it down, and now you have a flat spot on the nose.Even tougher, find the correct lugnuts.
Good luck. Some will pop up eventually so you better be ready to jump.

 

[moparron42]

I have 1 NOS 14x6 with chrome peeling on one little spot on the lip and have a few used 15s around. They are all 5x4.5 and the 15s are basically cores. They need chrome and centers blasted (currently painted). PM me with interest

do you still have the one spyder wheel? im very interested if you do.

Thanks,Ron