Next on the list: 1969 Super Bee Clone

[Billccm]

Okay, here we go again. Spoke with the seller. This seems to be a car that has spent it's entire life in Arizona until three years ago. It's been in Southern California since. New paint, believed to be original vinyl top (Dodge emblem upside down?). Drivers window stuck in the down position, no headlights, no wipers. Stops okay, but power brake canister is required. Not sure on the electronic ignition? Getting trunk and underbody pictures later this week. Opinions, please!

http://www.ebay.com/itm/291887936869?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT

 

[texas69bee]

You did state it was a clone but at least they could of got the tail stripe in the correct position.

 

[iraqivet01]

Without seeing it in person, your not seeing everything or the flaws

Good luck and hope it works out with your buy

 

[Richard Cranium]

Without seeing it in person, your not seeing everything or the flaws

I see a big dent in the passenger's door.

 

[Billccm]

Well, so far this car is looking good. Maybe a good buy at 20K?

 

[Billccm]

More trunk photos

 

[Basket case]

agree on the door dent, shows up in twopics, so it's not the lighting. roof emblems is an easy fix. If you were going to do a bee clone, why leave the fender emblems? and I wonder what the top dash pad looks like under that cover. looks like a pretty good car, the headliner isn't full of wrinkles, and the engine wiring isn't a mess.
good luck!

 

[69b3rt]

I can't help but notice the right rear marker light sitting on top of quarter panel instead of recessed in.

 

[Billccm]

I can't help but notice the right rear marker light sitting on top of quarter panel instead of recessed in.

I've seen this on occasion. What do you think; wrong part, or ill fitment?

 

[Basket case]

bet they used a '68 quarter.....

 

[mmissile]

Looks sketchy to me.

 

[Billccm]

bet they used a '68 quarter.....

Well, I guess I could look for the 'whale eye' marker light patch in the trunk to prove this theory, but from the pics it looks as if original sheet metal?
I really need to drive out and see this car. Only problem is I won't have a free weekend until the end of October. In a way that is good as I can keep shopping, and if the car does not sell the price might go down.