Max Wedge e-brake

[Auto Teach]

Does anyone one reproduce the extra brackets on the floor pan for the brake cables on a max wedge car?

 

[Darter6]

Try Kramer Automotive for any Max Wedge Stuff. Jim Kramer is a worth of knowledge on Maxie & Hemi early "B's".

 

[Richard Cranium]

Nice teaser shot. How about some more?

 

[Auto Teach]

Nice teaser shot. How about some more?

Wish I had more found the image on the net.

 

[Richard Cranium]

Wish I had more found the image on the net.

You faked us out!!!!!

 

[62MAX]

Go here. http://crossramconnection.com/

 

[64 Post]

Depending on the make, the brackets were either welded on or bolted on. Dodge was bolted, Plymouth was welded, or vice-versa, so please verify. I honestly can’t remember anymore.

 

[1962polara]

Crossram connection has everything MW including those ..as 62max commented above

 

[62MAX]

Depending on the make, the brackets were either welded on or bolted on. Dodge was bolted, Plymouth was welded, or vice-versa, so please verify. I honestly can’t remember anymore.

Plymouth welded,I have a picture of the exact location,if I can find it I'll post it.

 

[Auto Teach]

Plymouth welded,I have a picture of the exact location,if I can find it I'll post it.

Thanks for the info. guys. Never thought of Crossram Connection.

 

[62MAX]

Hope you can figure this out,first and second give measurements from driver side door sill and front of floor pan,third picture is front passenger side sill to bracket mounting.If you relate the bracket mounting to the floor pan ribs,it will work out.Notice the bracket mounting is angled,that is how the holes need to be drilled.

 

[Auto Teach]

Hope you can figure this out,first and second give measurements from driver side door sill and front of floor pan,third picture is front passenger side sill to bracket mounting.If you relate the bracket mounting to the floor pan ribs,it will work out.Notice the bracket mounting is angled,that is how the holes need to be drilled.

View attachment 386875 View attachment 386876 View attachment 386877

Thank you very much.

 

[early2drsedan]

Thank you very much.

63 dodges i had where welded 63 plymouths i had where bolted