SOLD 1973 charger
- Thread starter hacksaw
- Start date
- Status
Bb70charger500
Well-Known Member
How are the fenders,trunk lid and doors ? Any rust
if i remember rite the pass door had some. .... i will look in the morning and take more pics ... raining cats and dogs atm ....
Bb70charger500
Well-Known Member
OK thanks
here are a few picks ...... found a black upper and lower door panels and the rear trim (next to back seat) and kick panrls all in black with wood trim in real nice shape in the trunk. drivers door is good fenders and pass door are useable but not perfict. back bummper is rechromeable but not good looking at all. gold insides are all there .. factory AM/FM radio .. split bench needs to be recoverd but still good. back seat is nice. dash pad is cracked... sorry .... grills are nice .. no cracks chips or missing parts. let me know what ya want.
PM sent
Street fighter
Well-Known Member
I am in need of a hood that is in good condition no rust.
SkinnyZombie
New Member
Are there any holes in the fenders? If there isn't and you still have them, how much for each?
Kernel Sanders
Well-Known Member
- Local time
- 10:43 PM
- Joined
- Dec 13, 2008
- Messages
- 823
- Reaction score
- 249
- Location
- Ottawa, Ontario, Canada
Looking for a good set of big block torsion bars 662-663 or 664-665
Hueyjockey
Active Member
Looking for a rear sway bar.
Thnx
Thnx
hemihead
Well-Known Member
Looking for a standard Rallye Cluster . No Clock or Tach . Thank You .
D.MIKE
New Member
Interested in front grills/and need rt rear light bucket or maybe both. What kind of prices?
Kernel Sanders
Well-Known Member
- Local time
- 10:43 PM
- Joined
- Dec 13, 2008
- Messages
- 823
- Reaction score
- 249
- Location
- Ottawa, Ontario, Canada
hello re: torsion bars?
haven't got the car out yet .... but its a 318 with A/C. when i get so i can get to it .. il mesure it for ya ...
Ok .... sorry I haven't got back to some of you .... was hopeing to get the car out before the ground un-froze but it didn't happen. I will go awadeing in the mud tomarow to get more pics that have been asked for .... hang in there .. I don't want to say sumtin that i don't know forsure. .... all reply's will have a pic if posable .... Tnx .... PS .. phone number if asked .... not a big puter buff.
Last edited:
D.MIKE
New Member
hacksaw do not know if this will help but, 318la torsion bars not same as big block.
i know .... but with a rear sway bar im going to check it anyway ... ya never know
Yea tell me about it, I had a '73 SSP 400 and it had 6 cyl rated torsion bars (658-659). WTF
Kernel Sanders knows about this lol.
- Status
Similar threads
