• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

67 satellite t-bolts for trunk panel needed

1967 satellite

Well-Known Member
Local time
5:07 AM
Joined
Jun 23, 2013
Messages
193
Reaction score
44
Location
Athens, Alabama
I am in need of 4 pc's of the t-bolt that holds the trunk panel in place. I have the nuts but can't locate the bolts. Anyone have a few lying around or can someone tell me the correct name and where to get them. I believe there 10/24 x 5/8" long.
 
I would have to go out to my shed to see if they are in my bent finish panel. But do these look like what you are talking about?
s-l640.jpg

https://www.ebay.com/i/301735283257...MIrKWHkJW66AIVJIVaBR3poQpfEAkYBiABEgJq4_D_BwE
 
I have some spares I can send you. You need 4?

View attachment 927785 7
YES, those are the ones. I have been searching for over a year now. I do need 4 to complete the restore of my trunk lid tail piece. If you can please send to
Bob Ferenc
7115 Witmer road
wheatfield NY 14120

Many, many thanks and let me know if I can reimburse you.

Thanks again.
 
I have some spares I can send you. You need 4?

View attachment 927785 7
I just noticed your from West Palm Beach. We use to live in Delray Beach for 12 years. Moved back to New york 10 years ago for family. Now retired and trying to buy back our home that we lived in, in Polo Trace off Atlantic Ave. The same home we lived in is for sale but it's under consignment. Well see what happens.
 
I just noticed your from West Palm Beach. We use to live in Delray Beach for 12 years. Moved back to New york 10 years ago for family. Now retired and trying to buy back our home that we lived in, in Polo Trace off Atlantic Ave. The same home we lived in is for sale but it's under consignment. Well see what happens.
Cool. We're at the north end of the county, but still be great to have another 67 in the "neighborhood".

There seems to be a thin paper or plastic "washer" on these - I need to look closer I broke one before I realized it was there. I'll try to preserve them, but they are brittle. Need to figure out the best way to send them. Without the washer, I can probably just put the bolts in an envelope.
 
Cool. We're at the north end of the county, but still be great to have another 67 in the "neighborhood".

There seems to be a thin paper or plastic "washer" on these - I need to look closer I broke one before I realized it was there. I'll try to preserve them, but they are brittle. Need to figure out the best way to send them. Without the washer, I can probably just put the bolts in an envelope.
 
Just need the 4 bolts. I found the nuts at a local paint supplier who had a single bag of 12. As far as the washer, none of mine had anything attached. I will research and make something if needed. Many thanks again.
 
Just need the 4 bolts. I found the nuts at a local paint supplier who had a single bag of 12. As far as the washer, none of mine had anything attached. I will research and make something if needed. Many thanks again.
Here's what the washer looks like. It goes between the finish panel and the deck lid.
20200328_095549.jpg
20200328_095325.jpg
 
Here's what the washer looks like. It goes between the finish panel and the deck lid.
View attachment 928315 View attachment 928316
I chipped away the old, dried putty and was able to separate the washers from the bolts which will make them easier to mail. The washers appear to be soft plastic or something, almost rubbery.
15854044075582094178252.jpg

I'll send you a couple washers so you can see what they look like.
 
Last edited:
I chipped away the old, dried putty and was able to separate the washers from the bolts which will make them easier to mail. The washers appear to be soft plastic or something, almost rubbery.
View attachment 928326
I'll send you a couple washers so you can see what they look like.
Looking at these and thinking about it a little more, gasket is probably a better description than washer...my guess is that these are supposed to seal the mounting holes in the deck lid. Can probably just use a dab of RTV on each stud.

Dropped them in the mail today so you should have them next week some time.
 
Auto Transport Service
Back
Top