68 b body sway bar id

[madmopar]

Can anybody measure a sway bay that they know for sure will fit a 68 b body? I think I may have received the wrong one and unfortunately I don't have my original to compare to. Seems like its just slightly narrower in the front (bushing side) than it should be. I'm thinking it may be for an A-body but don't know for sure.

 

[440 4 speed]

Did you try it for fit?

 

[Jerry Hall]

Can anybody measure a sway bay that they know for sure will fit a 68 b body? I think I may have received the wrong one and unfortunately I don't have my original to compare to. Seems like its just slightly narrower in the front (bushing side) than it should be. I'm thinking it may be for an A-body but don't know for sure.

Where do you want the measurements from. I have a couple in the floor that I can measure sometime this evening.

 

[R413]

https://www.forbbodiesonly.com/mopa...pport-bracket-wont-fit.186399/#post-911470483

I have 2 photos of measurements in this old thread.

I will help you ID a 67-69 front bar.

let us know if you need more info.

EDIT 24.5” center of k member mounts
26.5” across front straight edge where bends start.

 

[madmopar]

Yes I did try to fit it first. Although I am using aftermarket bushings, still seem to be to narrow. The measurement would be from bend to bend not link to link.

 

[Jerry Hall]

Here are some pictures

 

[440 4 speed]

Can you tell us what it is in metric for the Europeans????

 

[Jerry Hall]

Can you tell us what it is in metric for the Europeans????

Use the conversion table of your choice, I'm sure you can figure it out. Just ask Google.

 

[440 4 speed]

Just kidding!
But, in 2006 we were on our way home from a Charger Meet in Jefferson City Missouri. We like to take State highways on our trips. While going through a small town in Southeast South Dakota the speed limit was marked in Kilometres. Should have stopped and taken a picture.

 

[Cranky]

'Learnt' some metric stuff when stationed in Germany for a year and a half. 200 clicks is 120 mph and the 4 banger car I had would do that and then some....according to the speedometer. Was just impressed that it could bury the speedometer lol. Actually, 200 clicks is more like 124. Glad my last job was still using decimals for measuring stuff!!

 

[madmopar]

Here are some pictures View attachment 934185 View attachment 934187 View attachment 934189 View attachment 934191 View attachment 934192

Thanks JH! Thanks exactly what I needed.
Will measure mine when I get home and update.